PictureFrame

RELEASE NOTE

When running, the Slate106 device updates its RTC clock each time the SMH300 reboots or each time it is paired to the SMH300

2018-02-20 PictureFrame V1.10.13 download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for working schedule policy
    • when the date is higher than 1st January 2017
      • Monday, Tuesday, Wednesday, Thursday, Friday
      • 8:00 to 19:00
      • Wakes-up every quarters of an hour
    • when the date is lower than 1st January 2017 (example: 1st January 2005)
      • 24/7
    • The date is updated only if the SLATE106 devices is paired with a SMH300 (whose version is upper than 3.10.52)
  • Change: decrease considerably the power consumption during the picture updating to increase the batteries lifetime
  • Change: improve BLE transfers robustness
  • Change: default RTC date is set to 1st January 2005 when the battery level is too low and super-capacitor is discharged
  • Fix: when an unexpected value is present in the configuration file APPLI.CFG, the default value is loaded now
  • Fix: after a file system format, the picture content could never be displayed (SMH300 configuration)
  • Fix: when power bank was plugged at boot-up, the image content update could not be done
COMPATIBILITIES
  • SPE Desktop Windows 1.10.10
  • SMH300: Gekkota OS V3.10.52

INFORMATION


DOCUMENTATION

OLD VERSIONS HISTORY


2017-10-12 PictureFrame V1.10.12 download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for test card
    • display the image testcard.ppk
    • if not present, clear the display
  • Add support for time and date update
  • Change: rename configuration file pf.cfg into appli.cfg
  • Fix: files property time and date was not properly managed
  • Fix: after a new configuration (new hub association), the image was only displayed after two consecutive connections to the hub

2017-09-15 PictureFrame V1.10.11 download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Fix: power consumption was too high in standby mode
  • Fix: slate106 device was blocked after an USB ejection launched from MS-Windows Desktop Task bar

2017-07-17 PictureFrame V1.10.10 download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for authentication with PIN code -pf.cfg - "pictureframe.testcard.enabled" - default value: true - "pictureframe.picture.filename": - default value: "hub.ppk" - "pictureframe.wpan.enabled": - default value: true - "pictureframe.wpan.central.type": - default value: "hub" - "pictureframe.hostname - SLATE106 device name (8 characters) - "pictureframe.index" - index of this SLATE106 device in the list of SLATE106 device controlled by the SMH300, - "pictureframe.wpan.authentication.method" - Values: - "none" (default) or - "pincode" - "pictureframe.wakeup.mask" - Default value: 1, - "pictureframe.wpan.authentication.pincode" - 4 digits pin code
  • Add support for new features when USB battery is plugged on SLATE106 device
    • test card mode
    • sleep mode inactivated & does not keep advertising its identifiers through Bluetooth Low Energy
      • note: don't use this mode permanently, because it could prevent other SLATE106 devices to advertise properly towards SMH300
  • Fix: some USB battery could prevent SLATE106 to work properly
  • Fix: pairing was working properly only after two SLATE106 device reboots (new device only)

2017-06-14 PictureFrame V1.10.10_beta8 download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Initial version
COMPATIBILITIES
  • SPE Desktop Windows 1.10.10
  • SMH300: Gekkota OS V3.10.43 beta8

2017-06-27 PictureFrame V1.10.10_beta9 download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Fix: [slate106 with batteries] in case pluging USB cable (between slate106 and PC) a couple of time after the slate106 boot-up, the slate106 USB device could be not be mounted properly sometimes on MS-Windows. USB cable disconnection and reconnection was required to work around