Qether

RELEASE NOTE

Qether, or Qeedji Ethernet Tools, is a CLI (Command Line Interface) program running on MS-Windows able to send private Ethernet frames through a specified Ethernet network interface.

It allows to:

• list the Ethernet network interfaces available on your computer,
• list the Qeedji devices available in a given Ethernet network,
• get the system information from a device,
• update the firmware version of a device by sending a .bin firmware,
• update the configuration of a device by sending a .js configuration script,
• send a reboot command to a device.

Before sending a .js configuration script on your device or using the discover Qether command, ensure that your application has been upgraded with a suitable application version shown in the compatibility chapter.

2021-09-29 Qether V1.12.10 download (nt_ia32)

BUG FIX, NEW FEATURES, MINOR UPDATES

• Add support for discover Qether command for SBL10e device embedding the application with version 1.10.15 (or above)
• Add support for firmware version printing in the console when launching discover Qether command
• Add support for .js configuration file for configure Qether command
• Remove support for prefs.json configuration file for configure Qether command
  • consequently, in this version, the configure Qether command does not work anymore for SAP10e devices

COMPATIBILITIES

• Qeedji devices supporting Qether commands:
  • SBL10e device
    • occupancy_sensor_ble_enocean 1.12.10 (or above)
    • generic_server 1.10.15 (or above)
    • m365_room 1.10.15 (or above)
    • smart_office_obs 1.10.15 (or above)
    • regular 1.10.15 (or above)
  • SAP10e device
    • generic_server 1.11.10 (or above)
    • regular 1.11.10 (or above)
• .bin firmware
• .js configuration script
• Computer with:
  • MS-Windows 7, 10
  • Ethernet network interface

INFORMATION

DOCUMENTATION

• Qether user manual (1.12.10-001A/EN) download
• In case using the configuration command, use the .js file suitable for your device.

ONE COMMAND AT A TIME

When using Qether tool to update the firmware version for several devices at a time, thanks to a MS-Windows batch, it is recommended to execute the Qether commands the one after the other.

WINPCAP

WinPcap 4.1.3 (Windows packet capture library): - If WinPcap is not yet present, it is automatically installed by the Qether installer, - At the last step of WinPcap setup, please leave the checkbox Automatically start the WinPcap driver at boot time checked.

WLAN INTERFACE

• The Qether tool cannot work on WLAN interface of your computer.

CONFIGURE ERROR

The sending of prefs.json configuration file with Qether V1.12.10 (and above) returns this error explaining that only the .js configuration are now supported (and not the .json anymore): Parsing arguments failed: Invalid extension for configuration file. A JavaScript file is expected, with '.js' extension.

CONFIGURE

Sending a .js configuration script on a older application version may imply factory settings on this device.

OLD VERSIONS HISTORY

2020-01-08 Qether V1.11.13 download (nt_ia32)

BUG FIX, NEW FEATURES, MINOR UPDATES

• Add support for SAP10e devices (0139 product type)

COMPATIBILITIES

• Qeedji devices supporting Qether commands:
  • SBL10e device
    • generic_server 1.10.14 (or below)
    • m365_room 1.10.14 (or below)
    • regular 1.10.13 (or below)
    • smart_office_obs 1.10.12 (or below)
  • SAP10e device
    • regular 1.10.11
• .bin firmware
• prefs.json configuration script

2020-10-01 Qether V1.11.12 download (nt_ia32)

BUG FIX, NEW FEATURES, MINOR UPDATES

• Add support for qether -l command to list all the network interfaces, sorted with a <ID>
• Add support for -i <ID> option allowing to specify the network interface <ID> when sending a Qether command
  • required when having several network interface on yout computer
• Fix: depending on your initial Path system variable value
  • the Qether installation could not end
  • the Qether installation could be shortened without having to press on the close button and the Path system variable is not set properly
  • the Path environment variable could be corrupted

2020-08-10 Qether V1.11.11

BUG FIX, NEW FEATURES, MINOR UPDATES

• Add support for the C:\Program Files (x86)\Qeedji Qether environment variable value setting in Path system variables at Qether installation to be able to launch Qether from any of your computer directories

2020-06-23 Qether V1.11.10 download (nt_ia32)

BUG FIX, NEW FEATURES, MINOR UPDATES

• Add support for new commands:
  • info
  • discover

2020-06-11 Qether V1.10.10 download (nt_ia32)

BUG FIX, NEW FEATURES, MINOR UPDATES

• Initial version supporting the configure, install and reboot commands for SBL10e devices (0132 product type)