Generic server for SBL10e
RELEASE NOTE
The generic_server application periodically connects to a custom data source server to retrieve and display the appropriate light state and colour.
2023-06-22
V1.12.10 download
IMPORTANT
- Change: does support the discover command from only Qether V1.12.10 (and above)
- Change: does support the configure command from only Qether V1.12.10 (and above)
BUG FIX, NEW FEATURES, MINOR UPDATES
- Add support for CORS (Cross-Origin Resource Sharing) request with Access-Control-Allow-Origin header
- Add support for these user preferences
- system.httpd.cors.enable,
- system.httpd.cors.origin,
- Change: the administrator name length was limited to 15 characters preventing to enter a MAC address value (i.e. aa-bb-cc-dd-ee-ff) as administrator name
- Fix: in rare some case, it was not possible to reach the device on the local network
- Fix: in some case, the device was not restarting after having clicked on the restore factory preferences button in the device configuration Web user interface
- Fix: when coming straight from factory, or after a factory preferences restoration, when the device had to lighten in orange, the light was kept off
COMPATIBILITIES
- SBL10e device
- Qether 1.12.10 (or above)
LIMITATIONS
- DNS suffix is not yet supported. So the entire domain in the data source server must be entered.
INFORMATION
DOCUMENTATION
User manual 1.12.10~002A_en download
QETHER
CONFIGURATION SCRIPT TEMPLATE
000000000000.js
template 004A for generic_server
V1.12.10 (or above) download
OLD VERSIONS HISTORY
2022-05-20
V1.11.13 download
IMPORTANT
- Change: does support the discover command from only Qether V1.12.10 (and above)
- Change: does support the configure command from only Qether V1.12.10 (and above)
BUG FIX, NEW FEATURES, MINOR UPDATES
- Fix: proxy server was not working anymore
- Fix: in case using a proxy server, the domain value was transmitted already resolved to the proxy server
2022-05-13
V1.11.12 download
IMPORTANT
- Change: do not support the discover command from Qether V1.11.13 (and below)
- Change: do not support the configure command from Qether V1.11.13 (and below)
BUG FIX, NEW FEATURES, MINOR UPDATES
- Fix: some HTTP error code values returned by the remote server could prevent the application to work properly definitively. The restoration of the application software by Qether was not possible
2022-01-11
V1.11.11
IMPORTANT
- Change: do not support the discover command from Qether V1.11.13 (and below)
- Change: do not support the configure command from Qether V1.11.13 (and below)
BUG FIX, NEW FEATURES, MINOR UPDATES
- Add support for device configuration update with a .js script hosted on a TFTP server associated to DHCP server (code 66)
- Add support for these user preferences
- system.tftp.enable
- Add support for new functions in the .js script
- enableTftp();
- disableTftp();
- Add support for the system.tftp.enable user preference
- Fix: in some case, in case the device had a static IP address and DNS servers was found automatically, the device network access was down until the timeout for the connexion attempts to the DHCP server had expired
2021-10-08
V1.11.10
IMPORTANT
- Change: do not support anymore the discover command from Qether V1.11.13 (and below)
- Change: do not support anymore the configure command from Qether V1.11.13 (and below)
BUG FIX, NEW FEATURES, MINOR UPDATES
- Fix: after a migration from regular 1.10.13 to regular 1.10.15, the data server input values was cleared in the Web user interface. In case another modification was done in the Web user interface, after a device reboot, the device could not be able to connect to the data source server
COMPATIBILITIES
- SBL10e device
- Qether 1.12.10 (or above)
2021-10-01
V1.10.15
IMPORTANT
- Change: do not support anymore the discover command from Qether V1.11.13 (and below)
- Change: do not support anymore the configure command from Qether V1.11.13 (and below)
BUG FIX, NEW FEATURES, MINOR UPDATES
- Add support for a Configuration > Tasks pane in the Web user interface allowing to program a daily reboot task
- Add support for firmware version number sending when receiving a discover Qether command or an info Qether command (Qether 1.12.10 and above)
- Add support for device configuration with a .js configuration script
- pushed on the .conf WebDAV directory of the device
- sent by the configure Qether command (Qether 1.12.10 and above)
- Add support for new functions in the .js configuration script allowing to set labels depending on the target device
- getFirmwareApp();
- getModelName();
- getHardwarePlatform();
- getPsn(PSN_SHORT_REPRESENTATION);
- getPsn(PSN_TYPE);
- getPsn(PSN_ORDINAL);
- getLan1Mac();
- Add support for new functions in the .js configuration script allowing to configure a device reboot task
- enableRebootTask();
- disableRebootTask();
- setRebootTime(6, 0);
- Add support for these user preferences
- system.task.reboot.enable: false (by default)
- system.task.reboot.time: 21600 (by default), number of second elapsed since midnight, means that the reboot task time is 6.00 AM
- when the NTP server is not set, the reboot task time is 24 hours after the last boot time
- appli.network.datasource.nb_retries_before_cache_reset: 20 (by default), max. number of unsuccessful connection attempts before switching off the light
- Change: the discover and configure commands from Qether V1.11.13 are not supported anymore, you must use Qether V1.12.10 (and above) only
- Change: after a device reboot, if the datasource server is not available, the light is kept to the Off state until the next successful connection
- Change: the light is switched off when the datasource server is not available after more than 20 following unsuccessful connection attempts
- Change: the administrator name lenght was limited to 15 characters preventing to enter a MAC address value (i.e. aa-bb-cc-dd-ee-ff) as administrator name
- Fix: in some case, the firmware upload in the device could fail when done with the Web user interface
- Fix: it was not possible to inactivate the DHCP timeout with the .js configuration script
- Fix: in some rare case, the SBL10e device should be unplugged from the Ethernet wall plug then plugged again to work properly
COMPATIBILITIES
- SBL10e device
- Qether 1.12.10 (or above)
PREFS.JSON EXAMPLE
prefs.json
example forgeneric_server
download
2021-09-09
V1.10.14
BUG FIX, NEW FEATURES, MINOR UPDATES
- Change: the minimal value for Heartbeat is 2 seconds instead of 10 seconds
COMPATIBILITIES
- SBL10e device
- Qether 1.11.13 (or above)
2021-09-07
V1.10.13
BUG FIX, NEW FEATURES, MINOR UPDATES
- Initial version
COMPATIBILITIES
- SBL10e device
- Qether 1.11.13 (or above)