Firmware and documentation for SMH300

RELEASE NOTE

Never make electric unplug on your SMH300 while software upgrade is in progress (green led enlightened for few minutes) else it may not be able to work properly

`2023-04-19` V4.14.15 download

BUG FIX, NEW FEATURES, MINOR UPDATES

Add support for Microsoft 365 services accounts

Change: after having installed this version for the first time, the EnOcean devices become not supported and the Push buttons Pairing and Sensors Pairing menu in the Configuration tab of the device Web user interface are not displayed. To activate back the EnOcean devices, set the innes.wpan-hub-srv.wpan_1.observer.enable to true

Change: after a reboot, the default URL entry for the Web page is now http://<device_ip_addr>/

Add support for GAP App with a .gap extension in the URL field of the Pull WebDAV radio of the App pane of the Configuration menu of the Web user interface

Add support for GAP App with a .gap extension for the Local deposit radio of the App pane of the Configuration menu of the Web user interface

Add support for the message Waiting - Fail soft mode – clean up in progress when removing a GAP App when the Fail soft mode level 1 is reached

Add support for system.architecture Web IDL to get device architecture information

Add support for launcher.cacheManager Web IDL to pause/resume downloading of GAP App

Add support for system.maintenance Web IDL to get the number of reboot and the number max of reboot before going in Fail soft mode

Add support for utils.preferencesManager Web IDL to add new custom preferences

Add support for ioManager Web IDL to get remote file and install it in file system

Change: after a reboot, the defaut URL entry for the Web page is now http://<device_ip_addr>/.playout/

Change: when a .gap extension is detected in the URL field of the Pull WebDAV radio of the App pane of the Configuration menu, the slash character is not automatically added at the end of the URL

Change: update the list of embedded trusted root certificates

Change: renamed the button label Purge the App into Uninstall the App in the App pane of the Configuration menu of the Web user interface

Change: when coming straight from factory or after having pressed on the Factory preferences settings button,

the Status server checkbox and the Software and configurations installation server are not activated anymore in the Server pane of the Configuration menu of the Web user interface

the Use this URL for Status server and software and configurations installation server checkbox is not activated anymore in the App pane of the Configuration menu of the Web user interface

Fix: the _ character was not supported in the Name input of the Logs pane in the Maintenance menu of the device configuration Web interface

Fix: the following character string #& was not displayed properly in the Web user interface

Fix: unexpected carriage return was noticed in text areas having space characters with some Web page

Fix: the message Information - Complete installation, rebooting was not displayed before rebooting when a middleware upgrade order was done

Fix: after a App content updating by a USB mass storage insertion in the device, the state value of the launcher HTML tag in the device status was not updated with the right value

COMPATIBILITIES

Pictureframe V1.11.11 (or above)

Qeedji PowerPoint publisher for SLATE 1.10.12

Configuration-by-script 1.11.30 (or above)

INFORMATION

DOCUMENTATION

User manual (4.14.15~001A/EN) download

SUPPORTED MEDIAS

Devices supported medias and performances download

FAST WAKEUP PATCH

A patch is available to enhance reativity for custom application allowing to wake up the SLATE106 every 15 seconds min. instead of 15 minutes min. That supposes in this case that the SLATE106 is continuously powered by a an USB cable. For further information, contact support@qeedji.tech.

OLD VERSIONS HISTORY

`2020-01-20` V4.13.14

IMPORTANT

This version is supporting until 10 SLATE106 devices max. instead of 20 previously. Consequently, after the software upgrade, all the SLATE106 devices paired between the index 11 and the index 20 will be unpaired automatically from the hub.

BUG FIX, NEW FEATURES, MINOR UPDATES

Add support for new WPAN devices

EnOcean motion sensors

Model: E6211-K515

EnOcean push-buttons

Model: PTM 215B

Add support for .ppk content viewing from a Web browser

Add support for the user preference to configure display mode innes.wpan-hub-srv.device.slate.<index>.pictureframe.display.mode

Add support for 802.1X security for LAN network with the authentication methods:

EAP MD5

EAP GTC

EAP TLS

EAP TTLS - EAP MD5

EAP TTLS - EAP GTC

EAP TTLS - EAP MSCHAPV2

EAP TTLS - EAP TLS

EAP TTLS - MSCHAPV2

EAP TTLS - MSCHAP

EAP TTLS - PAP

EAP TTLS - CHAP

EAP PEAPV0 - MSCHAPV2

EAP PEAPV0 - GTC

EAP PEAPV0 - MD5

EAP MSCHAPV2

EAP FAST

Add support for new security cipher for WLAN network WPA-Enterprise (EAP) or WPA2-Enterprise (EAP) with the authentication methods:

EAP TLS

EAP TTLS - EAP MD5

EAP TTLS - EAP GTC

EAP TTLS - EAP MSCHAPV2

EAP TTLS - EAP TLS

EAP TTLS - MSCHAPV2

EAP TTLS - MSCHAP

EAP TTLS - PAP

EAP TTLS - CHAP

EAP PEAPV0 - MSCHAPV2

EAP PEAPV0 - GTC

EAP PEAPV0 - MD5

EAP FAST

Add support for Reboot manager panel in the Task menu of the Configuration tab of the Web UI allowing to create device reboot tasks

Add support for option SSID Hidden in the WLAN menu of the Web UI allowing to tell whether the SSID is broadcasted or not

Add support for new field for WLAN interface

Pairwise key ciphering:

CCMP (AES)

TKIP

Group key ciphering:

CCMP (AES)

TKIP

Add support for new WLAN chipset

Add support for remote bootstrap App

Add support for smb:// URL scheme allowing to download resources file available on shared directories of network disks

Supported protocol: SMB/CIFS 2.0 and SMB/CIFS 1.0

Remote file example in the manifest: smb://<computer_ip_addr>/<computer_directory>/file.txt (+ login + password)

Add support for Power Manager panel in the Task menu of the Configuration tab of the Web UI allowing to create power management tasks with the Energy consumption profile levels:

Very highly optimized

Highly optimized

Moderately optimized

Nominal Mode

Associated user preference for energy manager task: innes.power-manager.calendar (JSON value)

Add support for pictureframe_fast_wakeup-slate106-setup-1.11.11.rpk patch for custom App allowing to speed up interactivity

Add support for the matrix actions Start a timer <n> s repeated <m> times maximum in the configuration Web UI

Change: embeds the SLATE106 firmware version PictureFrame V1.11.11

Change: the max number of same device type handled at the same time is 10 (instead of 20)

Change security cipher label in the WLAN tab of the Web UI

WPA-PSK to WPA-Personal (PSK)

WPA2-PSK to WPA2-Personal (PSK)

Change: after having not interacted with the Web UI for a duration, a message Resource not found (Error 404) is displayed and the failover URL is http://<device-ip-addr>/.resources/error-<date>T<time>Z.html

Change: some specific error screens pages are now displayed in the Web UI when facing error connection with the device Web server

Change: in the Web UI, display now both the UTC Date & Time and the local Date & Time

Change: the audio volume is immediately changing when the volume control value is modified in the menu output of the Web UI

Change: remove the time percentage panel displayed when rebooting a device

Change: it is now possible to create task occurring every day or only from date1 to date2

Change: in the mode Local deposit of the App menu of the Web UI, the archive is disappearing now automatically when taken into account by the device as soon as the App is loaded.

Change: remove *.br and *.gz files from file system to decrease the firmware size

Change: when the configuration server URL was wrong, a memory leak could be noticed

Change: the brand name moves from Innes to Qeedji

Change: the Web UI logo Qeedji is supporting a button to return to the Web page http://<device_ip_addr>/.playout/

Change the Web UI look & feel for the WebDAV directories http://<device_ip_addr>/<directory>/

with <directory> = .admin, .extension, .log, .playlog, .playout, .resources, .software, .status, .upnp

Change the Web browser tab title when connecting to the device Web UI:

Title: <MODEL> (<Hostname>)

Pictogram: black gecko

Fix: the device was not exiting fail soft mode after having loaded an App through the Local deposit App menu of the Web UI

Fix: in some cases, the device could not stop rebooting in fail soft mode state

Fix: after having installed a certificate with a configuration script, sometimes it was not possible anymore to connect to the device in https or to add a new certificate.

if the previous case occurs in this version, the certificate list is cleared once then the issue should not occur anymore. Think to add back the missing certificate after the device reboot.

if the previous case occurs in this version while the test card is displayed, a message Cryptographic database corrupted, please reboot for repairing is displayed. The device needs to be restarted (Web UI, or electrical unplug)

Fix: the USB injection was not working with some USB stick models

`2019-06-27` V4.11.11 download

BUG FIX, NEW FEATURES, MINOR UPDATES

Add support for WebUI HTML5 supporting

in the menu Configuration > Output:

For each SLATE106 device, display the

PSN: Product serial number

Hostname: device hostname (Bluetooth device name)

Model: device model

Software rev: Application software version

value updated once

Firmware rev: device bootloader version

Hardware rev: device hardware revision

Manufacturer: device manufacturer

Battery level: average value in percent for all the device batteries

in the menu SLATEs pairing:

Common parameters

General:

Active interval

from hh1:mm1 to hh2:mm2

default value: 8.00 AM to 7.00 PM

all day

Active days

Mon, Tue, Wed, Thu, Fri, Sat, Sun

Wake up regularly

Every quarter of an hour

by interval (custom value)

Wake up by vibration sensor

activation/inactivation

Touch key

activation/inactivation

Message Overlay

activation/inactivation

compatible with the mobile application Slate Message Overlay. For further information about this mobile application, contact support@qeedji.tech

Matrix

secondary image display

activation/inactivation

pictureframe behaviour customization (advanced user)

Touch key

Key mapping for the secondary image

Reset PIN code for the WPAN2 connection (used with the mobile application for example)

Add a graphical interface APPLI.HTA allowing to edit the parameters values of the APPLI.CFG file

Add support for new WIFI chipsets references

Change: brandname Innes to Qeedji accompanied with its black gecko pictogram

Change the Web browser tab rendering when connecting to the device WebUI:

Title: <MODEL> (<Hostname>)

Pictogram: black gecko

Change: embeds the SLATE106 firmware version PictureFrame V1.11.10

Change: remove the files .PAIRED and APPLI.CFG from WebDAV directory http://<device_IP_address>/.output/<index>

Change: file name from PF.CFG to APPLI.CFG

Change: The 20 WebDAV directories http://<device_IP_address>/.output/<index> are created by default at the device start up

Change: start to measure the signal quality only after the 2nd BLE connection

Change the SMH300 preferences names related to the SLATE configuration

innes.wpan-hub-srv.device.slate.*.pictureframe.vibration_sensor.enabled

innes.wpan-hub-srv.device.slate.*.pictureframe.key.enabled

innes.wpan-hub-srv.device.slate.*.pictureframe.wakeup.heartbeat.enabled

innes.wpan-hub-srv.device.slate.*.pictureframe.wakeup.heartbeat.mode

innes.wpan-hub-srv.device.slate.*.pictureframe.wakeup.heartbeat.period

innes.wpan-hub-srv.device.slate.*.pictureframe.wakeup.day.interval

innes.wpan-hub-srv.device.slate.*.pictureframe.wakeup.weekdays.mask

innes.wpan-hub-srv.device.slate.*.pictureframe.wpan.enabled

innes.wpan-hub-srv.device.slate.*.pictureframe.overlay.message.enabled

innes.wpan-hub-srv.device.slate.*.pictureframe.action.delay1

innes.wpan-hub-srv.device.slate.*.pictureframe.action.delay2

innes.wpan-hub-srv.device.slate.*.pictureframe.action.key_lock.idle_time

innes.wpan-hub-srv.device.slate.*.pictureframe.after_heartbeat_actions.mask

innes.wpan-hub-srv.device.slate.*.pictureframe.after_key_actions.mask

innes.wpan-hub-srv.device.slate.*.pictureframe.after_nfc_tag_actions.mask

innes.wpan-hub-srv.device.slate.*.pictureframe.after_nfc_writer_actions.mask

innes.wpan-hub-srv.device.slate.*.pictureframe.after_testcard_actions.mask

innes.wpan-hub-srv.device.slate.*.pictureframe.after_usb_ms_actions.mask

innes.wpan-hub-srv.device.slate.*.pictureframe.after_usb_power_actions.mask

innes.wpan-hub-srv.device.slate.*.pictureframe.after_vibration_actions.mask

innes.wpan-hub-srv.device.slate.*.pictureframe.key.left.map

innes.wpan-hub-srv.device.slate.*.pictureframe.key.middle.map

innes.wpan-hub-srv.device.slate.*.pictureframe.key.right.map

innes.wpan-hub-srv.device.slate.*.pictureframe.nfc.features.mask

innes.wpan-hub-srv.device.slate.*.pictureframe.picture.filename

innes.wpan-hub-srv.device.slate.<index>.pictureframe.index

innes.wpan-hub-srv.device.slate.<index>.pictureframe.hostname

innes.wpan-hub-srv.device.slate.<index>.pictureframe.wpan1.authentication.method

innes.wpan-hub-srv.device.slate.<index>.pictureframe.wpan1.authentication.pincode

innes.wpan-hub-srv.device.slate.<index>.pictureframe.testcard.enabled

Change: display all the available network interfaces in menu Information > Network (WebUI)

Change green LED behaviour depending on these different states

1 flash every 4 seconds: Nominal behaviour

2 flashs + 4 seconds OFF: Fail soft mode level1

3 flashs + 4 seconds OFF: Fail soft mode level2

4 flashs + 4 seconds OFF: System data partition check disk

5 flashs + 4 seconds OFF: Error noticed on system data partition: partition format is required

6 flashs + 4 seconds OFF: Firmware upgrading (or patch installation)

7 flashs + 4 seconds OFF: Not possible to write on SSD anymore. If persistent, contact support@qeedji.tech

Fix: a unexpected message Error while board initialization on the bluetooth connector could be prompted sometimes when connecting to the device WebUI

Fix: in some case the SLATEs could not update its content

`2018-02-20` V3.12.52 download

BUG FIX, NEW FEATURES, MINOR UPDATES

Add support for the embedded version PictureFrame V1.10.13

Add support for working schedule policy

default values

Working days: Monday, Tuesday, Wednesday, Thursday, Friday

Working time: 8:00 to 19:00

Waking-up period: every quarters of an hour

Add support for date & time update for SLATE106 devices (done by the SLATE106 devices after each SMH300 device boot-up)

Add the possibility (for debug purpose) to visualize the SMH300 current content (not sent to the SLATE106 devices)

WebUI directory: .output

File name screenshot.jpg

Add support for NTLM V2 authentication

Add support for German language (WebUI)

Add support for Spanish language (WebUI)

Add support for Maintenance > Middleware menu to upgrade device middleware (WebUI)

Add support for no proxy for (WebUI)

Status server

Software and configuration installation server as well as

Delivery server

Note: the tick value can be different for the 3 items above when they are not sharing the same domain (or IP address)

Add support for Maintenance > Logs menu to print debug logs (WebUI)

Name

app (default)

widget (default)

Contact support@qeedji.tech to know some other log Names to activate.

Level

OFF

default value is OFF. In nominal case, the device logs Level has to be OFF else some unexpected rendering issue could be noticed

ERROR: allows to only display logs with the ERROR type

DEBUG: allows to only display logs with the DEBUG type

option: Activate trace of undeclared categories

default value: not ticked. Allows to activate all the available traces of the device. In nominal case, this option must be NOT activated

Change: minimum date for date picker is 1st January 2005 (WebUI)

Change: display all the available network interfaces in menu Information > Network (WebUI)

Change: when pasting from clip board a URL, login & password, clear the password value when it is not available (WebUI)

Change: BLE connection quality status is now green when the picture updating is fully warrantied between two consecutive SLATE106 devices wake-up

Fix: WLAN interface could disappear in WebUI when the WLAN router was not available a couple of time, or when WLAN configuration was wrong

Fix: after a migration, pairing configuration could be lost and device could keep trying to pair without success

`2017-10-12` V3.12.48 download

BUG FIX, NEW FEATURES, MINOR UPDATES

Add support for the embedded version Pictureframe V1.10.12

`2017-09-15` V3.12.46 download

BUG FIX, NEW FEATURES, MINOR UPDATES

Add support for the embedded version Pictureframe V1.10.11

`2017-08-04` V3.12.45 download

IMPORTANT

Warning: if required, do modify the PIN code only after the SLATE106 device has been paired else SMH300 may never manage to pair the device

When using 20 SLATE106 devices, don't set the polling period below 10 minutes else the last SLATE106 devices of the list could not be updated properly

Add support for the embedded version Pictureframe V1.10.10

`2017-07-17` V3.12.43 download

BUG FIX, NEW FEATURES, MINOR UPDATES

Add support for authentication with PIN code

innes.slate-hub-srv.cfg.pictureframe.

Add support for Bluetooth Low Energy signal quality status

Add partial support for test card

Change: some menu have been modified to support SLATE106 devices

maintenance > Slate Pairing

configuration > Output

Add support for the embedded version Pictureframe V1.10.10

Firmware and documentation for SMH300

2023-04-19 V4.14.15 download

BUG FIX, NEW FEATURES, MINOR UPDATES

COMPATIBILITIES

INFORMATION

DOCUMENTATION

QEEDJI POWERPOINT PUBLISHER FOR SLATE

CONFIGURATION SCRIPT

SDK DEVELOPERS

SUPPORTED MEDIAS

FAST WAKEUP PATCH

OLD VERSIONS HISTORY

2020-01-20 V4.13.14

IMPORTANT

BUG FIX, NEW FEATURES, MINOR UPDATES

2019-06-27 V4.11.11 download

BUG FIX, NEW FEATURES, MINOR UPDATES

2018-02-20 V3.12.52 download

BUG FIX, NEW FEATURES, MINOR UPDATES

2017-10-12 V3.12.48 download

BUG FIX, NEW FEATURES, MINOR UPDATES

2017-09-15 V3.12.46 download

BUG FIX, NEW FEATURES, MINOR UPDATES

2017-08-04 V3.12.45 download

IMPORTANT

2017-07-17 V3.12.43 download

BUG FIX, NEW FEATURES, MINOR UPDATES

`2023-04-19` V4.14.15 download

`2020-01-20` V4.13.14

`2019-06-27` V4.11.11 download

`2018-02-20` V3.12.52 download

`2017-10-12` V3.12.48 download

`2017-09-15` V3.12.46 download

`2017-08-04` V3.12.45 download

`2017-07-17` V3.12.43 download