Gekkota OS for SMH300

RELEASE NOTE

Never make electric unplug on your SMH300 while software upgrade is in progress (green led enlightened for few minutes) else it may not be able to work properly

2018-02-20 V3.12.52 download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for the embedded version PictureFrame V1.10.13
  • Add support for working schedule policy
    • default values
      • Working days: Monday, Tuesday, Wednesday, Thursday, Friday
      • Working time: 8:00 to 19:00
      • Waking-up period: every quarters of an hour
  • Add support for date & time update for SLATE106 devices (done by the SLATE106 devices after each SMH300 device boot-up)
  • Add the possibility (for debug purpose) to visualize the SMH300 current content (not sent to the SLATE106 devices)
    • WebUI directory: .output
    • File name screenshot.jpg
  • Add support for NTLM V2 authentication
  • Add support for German language (WebUI)
  • Add support for Spanish language (WebUI)
  • Add support for Maintenance > Middleware menu to upgrade device middleware (WebUI)
  • Add support for no proxy for (WebUI)
    • Status server
    • Software and configuration installation server as well as
    • Delivery server
    • Note: the tick value can be different for the 3 items above when they are not sharing the same domain (or IP address)
  • Add support for Maintenance > Logs menu to print debug logs (WebUI)
    • Name
      • app (default)
      • widget (default)
      • Contact support@innes.fr to know some other log Names to activate.
    • Level
      • OFF
        • default value is OFF. In nominal case, the device logs Level has to be OFF else some unexpected rendering issue could be noticed
      • ERROR: allows to only display logs with the ERROR type
      • DEBUG: allows to only display logs with the DEBUG type
    • option: Activate trace of undeclared categories
      • default value: not ticked. Allows to activate all the available traces of the device. In nominal case, this option must be NOT activated
  • Change: minimum date for date picker is 1st January 2005 (WebUI)
  • Change: display all the available network interfaces in menu Information > Network (WebUI)
  • Change: when pasting from clip board a Plugncast configuration (URL, login, password), clear the password value when it is not available (WebUI)
  • Change: BLE connection quality status is now green when the picture updating is fully warrantied between two consecutive SLATE106 devices wake-up
  • Fix: WLAN interface could disappear in WebUI when the WLAN router was not available a couple of time, or when WLAN configuration was wrong
  • Fix: after a migration, pairing configuration could be lost and device could keep trying to pair without success
WILL BE CORRECTED IN NEXT VERSIONS
  • Add support for SLATE106 buttons management
  • Add support for SLATE106 RFID
  • Add support for battery level status & battery presence detection
COMPATIBILITIES
  • Screen Composer G3 V3.20.13 (or above)
  • PictureFrame V1.10.13

INFORMATION


DOCUMENTATION

SUPPORTED MEDIAS

OLD VERSIONS HISTORY


2017-10-12 V3.12.48 download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for the embedded version Pictureframe V1.10.12

2017-09-15 V3.12.46 download

IMPORTANT
BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for the embedded version Pictureframe V1.10.11

2017-08-04 V3.12.45 download

IMPORTANT
  • Warning: if required, do modify the PIN code only after the SLATE106 device has been paired else SMH300 may never manage to pair the device
  • When using 20 SLATE106 devices, don't set the polling period below 10 minutes else the last SLATE106 devices of the list could not be updated properly
  • Add support for the embedded version Pictureframe V1.10.10

2017-07-17 V3.12.43 download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for authentication with PIN code
    • innes.slate-hub-srv.cfg.pictureframe.
  • Add support for Bluetooth Low Energy signal quality status
  • Add partial support for test card
  • Change: some menu have been modified to support SLATE106 devices
    • maintenance > Slate Pairing
    • configuration > Output
  • Add support for the embedded version Pictureframe V1.10.10