▲

Regular

RELEASE NOTE

Once paired to up to 10 SLATEs, the Regular application allows to:

This application is put by default on the SAP10e devices at factory.

2022-11-15 V1.11.10 download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for new panes in the device configuration Web user interface
    • Configuration > Tasks
    • Configuration > Date and time
    • Maintenance > Logs
  • Add support for device configuration with a .js configuration script
    • pushed on the .conf WebDAV directory of the device
    • hosted on a TFTP server associated to DHCP server (code 66)
    • sent by the configure Qether command (Qether 1.12.10 and above)
  • Add support for CORS (Cross-Origin Resource Sharing) request with Access-Control-Allow-Origin header
  • Add support for these user preferences
    • system.tftp.enable
    • system.task.reboot.enable: false (by default)
    • system.task.reboot.time: 21600 (by default), number of second elapsed since midnight, means that the reboot task time is 6.00 AM
      • when the NTP server is not set, the reboot task time is 24 hours after the last boot time
    • system.httpd.cors.enable,
    • system.httpd.cors.origin,
  • Add support for firmware version number sending when receiving a discover Qether command or an info Qether command (Qether 1.12.10 and above)
  • Change: the discover and configure commands from Qether V1.11.13 are not supported anymore, you must use Qether V1.12.10 (and above) only
  • Change: the administrator name length was limited to 15 characters preventing to enter a MAC address value (i.e. aa-bb-cc-dd-ee-ff) as administrator name
  • Fix: some HTTP error code values returned by the remote server could prevent the application to work properly definitively. The restoration of the application software by Qether was not possible
  • Fix: in some case, in case the device had a static IP address and DNS servers was found automatically, the device network access was down until the timeout for the connexion attempts to the DHCP server had expired
  • Fix: in some case, the firmware upload could fail when done with the Web user interface
  • Fix: in some rare case, the device should be unplugged from the Ethernet wall plug then plugged again to work properly
  • Fix: setting as static IP address, the same IP address value as the one previously given by DHCP prevent the user to connect to the device Web user interface after the device reboot
  • Fix: when a SLATE was previously paired to another SAP10e device, it was possible to pair it for a while but it was disappearing afterwards in less than 15 minutes
COMPATIBILITIES
  • SAP10e device
  • Qether 1.12.10 (or above)

INFORMATION

DOCUMENTATION

User manual 1.11.10~002A/EN download

QEEDJI POWERPOINT PUBLISHER FOR SLATE

Link to Qeedji PowerPoint Publisher for SLATE

QETHER

Link to Qether tool

CONFIGURATION SCRIPT TEMPLATE

000000000000.js template 001A for regular V1.11.10 (or above) download

OLD VERSIONS HISTORY

2021-02-25 V1.10.11 download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Fix: the device could not detect SLATEs coming straight from factory
COMPATIBILITIES
  • SAP10e device
  • Qether 1.11.13 (or above)

2021-02-10 V1.10.10

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Initial version
COMPATIBILITIES
  • SAP10e device
  • Qether 1.11.13 (or above)