Olivier,

Voici pour revue le markdown Tested peripherals

Tested peripherals

SUMMARY 2020-04-27 (last update)

PERIPHERALS

INFORMATION

• About HDMI-Input
  • To know the HDMI-input usage conditions, refer to DMB400 release note
  • The peripherals HDMI-input with HDCP activated are not yet supported
    • note that, by example, HDCP is often activated on DVD player
• About the HDHR4-2DT DVB-T to HTTP streamer
  • Connect to the streamer Web interface and launch Channel Lineup / Detect channels then get the <channel number> of the channel to view
  • Play the url:
    • http://<IP_adress>:5004/auto/v<channel number>
  • In case the signal is too low, a message video can't be played because the file is corrupted is displayed. After the signal comes back, the video is not displayed again. You need to publish again or play again the url
• About the TERADEK CUBE-105 Encoder/streamer
  • TERADEK CUBE-105 Encoder/streamer user guide 001A/EN Download
• About the TERACUE ENC-300-DVI-PORTABLE
  • TERACUE Encoder/streamer user guide 001A/EN Download
• About the DAHUA IPC-HFW2300R-Z, launch the RTSP URL containing the login/password for the RTSP authentication
  • rtsp://<user>:<password>@<nvr4208_ip_addr>:554/cam/realmonitor?channel=<m>&subtype=<n>
    • with <m>: for ethernet input of the 8 possible video channels
    • with <n>: 0 to play the main stream (default), 1 to play the secondary stream
  • DAHUA IPC-HFW2300R-Z versus DME204
    • Warning: in case several clients are playing the same RTSP channel, it is recommended to not install the DME204 behind cascaded switchs, because some of them may prevent to receive the RTSP properly. To work around, install the DME204 close to the network head.
• About the Pi 4 Model B & DVB TV µHAT
  • Waiting that TVheadend is supporting officially the DVB-T to UDP gateway feature, Innes is proposing a temporary software solution TVheadend_4.3-InnesPatched1 which is supporting it.
• About the Mediastar 783 DVB-T/T2 LAN-Caster
  • Mediastar 783 DVB-T/T2 LAN-Caster 001A/EN Download
• About the TP-LINK TL-EAP225
  • TP-LINK TL-EAP225 WPA-Enterprise configuration 001A/EN) Download
• About the TP-LINK TL-T1500G
  • TP-LINK TL-T1500G 802.1X configuration 001A/EN Download
• About the USB to WPAN adapter
  • set the appropriate value for the innes.adapters.serial.uart_1.syspath user preference in the Qeedji Gekkota OS device: | Qeedji device | default value | value to support USB to WPAN peripheral |:--|:--|:-- | Gekkkota OS 4.13.11 for device SMT210 | /dev/ttyUSB0 | /dev/ttyACM0 | Gekkkota OS 4.13.10 for device SMA300 | /dev/ttyUSB0 | /dev/ttyACM0 | Gekkkota OS 4.13.10 for device DMB400 | /dev/ttyAS1 | /dev/ttyACM0
  • For further information about this Qeedji USB to WPAN peripheral, contact support@qeedji.tech